Insert ACTO^® Oxy Air in the ACTO^® SATEJ device. ACTO^® SATEJ generates dry disinfection vapour of Hydrogen Peroxide. Place the device in the previously cleaned and disinfected room. The product is sprayed to the closed area in the amount of minimum 7 mL to 1 m3 volume.

Follow the instruction manual of the pulverization device for the usage area, product amount to be used, and exposure time. 

Before the airborne disinfection, all devices must be switched off. The ventilation system, doors, and windows must be closed.

After the pulverization, the area should be adequately ventilated. No personnel should be present in the area during the disinfection process until the ventilation is complete.

Solution of ACTO^® Oxy Air Required as per below table DOSAGE DEPENDS UPON ACTUAL CONDITIONS

*7 mL ACTO^® Oxy Air Required per m3 – Complies to international standard

For Surface Disinfection: The product is used as a fast surface disinfectant in its ready-to- use spraying form. Spray the product directly onto the area to be disinfected from 30cm away.

After waiting for the action time, wipe it with a lint-free cloth or spray the product directly onto a lint-free cloth and wipe the surfaces, and then allow onto dry.

Wait for 30 seconds for bactericidal, fungicidal and virucidal activity and 5 minutes for mycobactericidal and tuberculocidal activity.